Advantages:
 | Water repellent |
| Allows vapor passage |
| Penetrates up to 3/4 of an inch |
| Preserves original color |
| Reduces alkali/efflorescence attack |
| Prolongs life of surface |
| Freeze thaw resistance exceeds 360 cycles |
| Maintains surface cleanliness |
| Ease of application - no mixing |
| Prevents mildew and fungi |
| Improves weathering resistance of natural and manufactured brick products |
Description:
MOXIE 1300 BRICK SEALER is a water based, non-toxic,
non-flammable sealer. When applied to brick or ornamental surfaces, it undergoes a
chemical reaction which changes MOXIE 1300 BRICK SEALER from a liquid to a hard silicone
resin that dries in 24 hours to form a water repellent barrier. Treatment forms a water
repellent zone up to 3/4 inch deep for porous brick and mortar, ranging down to 1/8 inch
for dense, fine pored brick masonry products. Proprietary catalyst aids in transformation
into a silicone film similar to a silane/siloxane. Test data shows superior results over
silane/siloxane sealers without alcohol or petroleum solvents. Produces a breathable,
water repellent surface.
Packaging:
MOXIE 1300 BRICK SEALER is available in the following
packages:
 | 55 gallon drum (US) |
|
5 gallon pail
(US) |
1 gallon bottle
(US) |
Applicable Standards:
MOXIE 1300 BRICK SEALER meets or exceeds the following specifications:
| ASTM C 156 |
| ASTM C 666 |
| ASTM D 3960 |
Limitations:
MOXIE 1300 BRICK SEALER should not be applied on moist or
wet surfaces. Do not apply in direct sunlight.
Preparatory Work:
All construction faults and cracks should be repaired properly. All surfaces should be
thoroughly cleaned and rinsed. After a rainfall, allow a minimum of 72 hours for surfaces
to dry before application of sealer. Do not apply in damp, moist weather. New brick mortar
should age at least 30 days before application. Pressure wash new mortar residue from
brick surface. MOXIE 1300 BRICK SEALER will react with any mortar residue and produce a
white surface
Application Method:
- Spray over area and allow a rundown of 12 inches during application which will assure
adequate coverage. A brush or roller may also be used. Apply second coat within 5 minutes
of first.
- Allow 24 hours curing for maximum performance.
Surface Coverage:
50-100 sq. ft. per gallon, two coats, depending on porosity
Precautions:
- Do not allow to freeze.
- Avoid contact with eyes.
- Due to pH level do not allow this product
to come in contact with plant life or leather. Do not allow product to come in
contact with glass, porcelain or ceramic tile, aluminum, zinc or galvanized steel, remove
with a damp cloth immediately. Product will permanently etch or erode the smooth
surface. Must be rinsed with water or removed with damp cloth immediately. DO NOT APPLY IN
WINDY CONDITIONS.
Limited Warranty:
Limited Warranty:
Limited Warranty:
Limited Warranty: Five years
DOWNLOAD
U.S. GOVERNMENT MATERIAL SAFETY DATA SHEET (MSDS) FOR MOXIE 1300 AS AN ADOBE
ACROBAT PDF DOCUMENT
DOWNLOAD
THIS PAGE AS AN ADOBE ACROBAT PDF DOCUMENT IN IT'S ORIGINAL FORMAT
|
We manufacture concrete admixtures,
penetrating concrete sealers, penetrating concrete floor sealers, flooring sealers, concrete
waterproofers, brick
sealers, block sealers, stucco sealers, plaster waterproofers, shotcrete
waterproofers,
gunite waterproofers, mortar sealers, concrete cleaners, and concrete repair products.
