Advantages:
 | Water repellent |
| Allows vapor passage |
| Penetrates up to 3/4 of an inch |
| Preserves original color |
| Reduces alkali/efflorescence attack |
| Prolongs life of surface |
| Freeze thaw resistance exceeds 360 cycles |
| Maintains surface cleanliness |
| Ease of application - no mixing |
| Prevents mildew and fungi |
| Improves weathering resistance of natural and manufactured
masonry products |
|
| |
|
Description:
MOXIE 1400 BLOCK & STUCCO SEALER is a water based,
non-toxic, non-flammable sealer. When applied to block and stucco surfaces, it undergoes a
chemical reaction which changes MOXIE 1400 BLOCK & STUCCO SEALER from a liquid to a
hard silicone resin that dries in 24 hours to form a water repellent barrier. Treatment
forms a water repellent zone up to 3/4 inch deep for concrete block, ranging down to 1/8
inch for dense, fine pored masonry products or concrete. Proprietary catalyst aids in
transformation into a silicone film similar to a silane/siloxane. Test data shows superior
results over silane/siloxane sealers without alcohol or petroleum solvents. Produces a
breathable, water repellent surface.
|
| |
|
Packaging:
MOXIE 1400 BLOCK & STUCCO SEALER is available in the following packages:
| 55 gallon drum (U.S.) |
| 5 gallon pails (U.S.) |
| 1 gallon bottles (U.S.) |
|
| |
|
Applicable Standards:
MOXIE 1400 BLOCK & STUCCO SEALER meets or exceeds the following specifications:
| ASTM C 156 |
| ASTM C 666 |
| ASTM D 3960 |
|
| |
|
Limitations:
MOXIE 1400 BLOCK & STUCCO SEALER cannot be applied on
moist or wet surfaces. Do not apply in direct sunlight.
|
| |
|
Preparatory Work:
All construction faults and cracks should be repaired
properly. All surfaces should be thoroughly cleaned and rinsed. After a rainfall, allow 72
hours for surfaces to dry before application of sealer. New masonry should be aged at
least 30 days before application.
|
| |
|
Application Method:
- Spray using a low pressure, Hudson type sprayer. Allow a rundown of 12 inches during
application which will assure adequate coverage. A brush or roller may also be used. Apply
second coat within 5 minutes of first.
- Allow 24 hours curing for maximum performance.
|
| |
|
Surface Coverage:
50 to 100 sq. ft. per gallon, two coats, depending on
substrate porosity.
|
| |
|
Precautions:
- Do not allow to freeze.
- Avoid contact with eyes.
- Due to pH level do not allow this product
to come in contact with plant life or leather. Do not allow product to come in
contact with glass, porcelain or ceramic tile, aluminum, zinc or galvanized steel, remove
with a damp cloth immediately. Product will permanently etch or erode the smooth
surface. Must be rinsed with water or removed with damp cloth immediately. DO NOT APPLY IN
WINDY CONDITIONS.
|
| |
We manufacture concrete admixtures,
penetrating concrete sealers, penetrating concrete floor sealers, flooring sealers, concrete
waterproofers, brick
sealers, block sealers, stucco sealers, plaster waterproofers, shotcrete
waterproofers,
gunite waterproofers, mortar sealers, concrete cleaners, and concrete repair products.
